yamaha 719声卡认不出

轩子

rt

要编多长时间？？？
我的声卡，，认不出。。
yamaha719

babo

估计不会超过1小时

zonzi

不会超过1小时

轩子

here is my modules.conf

1. 
   
2. alias snd-card-0 snd-cs4232
   
3. install snd-cs4232
   
4. 
   
5. options sound dmabuf=1
   
6. alias synth0 opl3
   
7. options opl3 io=0x388
   
8. options cs4232 io=0x530 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=11
   

复制代码

and

1. 
   
2. root@maomao:~# lsmod
   
3. Module                  Size  Used by    Not tainted
   
4. snd-seq                33424   0  (autoclean)
   
5. snd-pcm-oss            37736   0  (unused)
   
6. snd-mixer-oss          12504   0  [snd-pcm-oss]
   
7. snd-pnp                 3168   0  (unused)
   
8. snd-cs4231-lib         14604   0  (unused)
   
9. snd-pcm                56072   0  [snd-pcm-oss snd-cs4231-lib]
   
10. snd-page-alloc          6328   0  [snd-cs4231-lib snd-pcm]
    
11. isa-pnp                30736   0  [snd-pnp]
    
12. snd-opl3-lib            5892   0  (unused)
    
13. snd-hwdep               4804   0  [snd-opl3-lib]
    
14. snd-timer              13604   0  [snd-seq snd-cs4231-lib snd-pcm snd-opl3-lib]
    
15. snd-mpu401-uart         3200   0  (unused)
    
16. snd-rawmidi            12740   0  [snd-mpu401-uart]
    
17. snd-seq-device          3888   0  [snd-seq snd-opl3-lib snd-rawmidi]
    
18. snd                    30852   0  [snd-seq snd-pcm-oss snd-mixer-oss snd-cs4231-lib snd-pcm snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
    
19. soundcore               3396   0  [snd]
    
20. usbcore                59308   1
    
21. ne2k-pci                4576   1
    
22. 8390                    6000   0  [ne2k-pci]
    
23. crc32                   2880   0  [8390]
    
24. nls_cp936             119936   1  (autoclean)
    
25. nls_gb2312               448   3  (autoclean)
    
26. ide-scsi                9328   0
    
27. agpgart                43940   0  (unused)
    

复制代码

messages :
Nov 19 00:26:57 maomao kernel: ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
Nov 19 00:26:57 maomao kernel: ad1848: No ISAPnP cards found, trying standard ones...
Nov 19 00:26:57 maomao kernel: cs4232: set synthio and synthirq to use the wavefront facilities.


but it still no sound.......
it is so easy in FC1 if i use sndconfig ,and set it as CS4232 chip
:help :help :help

alsaconf  can't check it out

windrose

试试用alsaconf重新设置一下声卡。

轩子

yes i had tried ,
but it is useless!!!

windrose

lspci 是什么结果？

轩子

root@maomao:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 06)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b)

And here is
root@maomao:~# /sbin/isapnp /etc/isapnp.conf
Board 1 has Identity 91 ff ff ff ff 35 48 83 0c:  CDC4835 Serial No -1 [checksum 91]
CDC4835/-1[0]{WSS/SB              }: Ports 0x534 0x388 0x220; IRQ5 DMA1 DMA0 --- Enabled OK
CDC4835/-1[1]{GAME                }: Port 0x208; --- Enabled OK
CDC4835/-1[2]{CTRL                }: Port 0x120; --- Enabled OK
CDC4835/-1[3]{MPU                 }: Port 0x330; IRQ11 --- Enabled OK

windrose

yamaha 719是isa接口的声卡吗？用的是cs4232芯片吗？
你的modules.conf是怎么来的？

轩子

in FC1
i use sndconfig ,and set it as CS4232 sound chip
just so,it will fine

but  slackware
it still cannot work.