还是没有搞定我的电视卡,天敏电视精灵

mars_diy

天敏电视精灵
用的是2.6.9的内核，声音中是搞不出来，好象没有tvaduio驱动

tuner: Ignoring new-style parameters in presence of obsolete ones
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 11, latency: 32, mmio: 0xe3061000
bttv0: using: Prolink Pixelview PlayTV (bt878) [card=16,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffbfff [init]
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by insmod option
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: Ignoring new-style parameters in presence of obsolete ones
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: unloading
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).

mars_diy

哈哈，很奇怪
现在是选择TV 有图象没声音，选择S-video 和compositel有声音没图象，晕倒！！！
另外我发现soundcore中如果包含了bttv，那应该能发出声音来了

mars_diy

搞定了，也顾不得现在已经是凌晨2点了，哈哈
原来天敏TV BABY 卡（BT878）的类型是：
card=54 - Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]
type=37 - LG PAL (newer TAPC series)

只需要
modprobe bttv card=54 audiomux=0 automute=1 tuner=37

或者
pre-install bttv modprobe -k tuner
options bttv  card=54 audiomux=0 automute=1 tuner=37
options tuner type=37

在天敏网站论坛上找到的
http://www.10moons.com/bbsok/dispbbs.asp?BoardID=21&ID=18857