usb鼠标的问题，RH9,我换了个USB的鼠标怎么也认不出来了

xiangfeng

我的是RH9,我换了个USB的鼠标怎么也认不出来了,动不了,哪位哥哥帮帮忙,我是新手

北南南北

用mouseconfig来试试

重新设置一下鼠标

xiangfeng

我用mouseconfig设置完了,提示鼠标服务正常启动了,但是还是不能用,启动时提示starting cups:usb_control/bulk_msg:timeout

北南南北

最初由 xiangfeng 发表
我用mouseconfig设置完了,提示鼠标服务正常启动了,但是还是不能用,启动时提示starting cups:usb_control/bulk_msg:timeout

把/etc/X11/XF86Config文件帖一下看看？

aammdd

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
        Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/psaux"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "InputDevice"

# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "SyncMaster"
        DisplaySize  320        240
        HorizSync    30.0 - 71.0
        VertRefresh  50.0 - 160.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nv"
        VendorName  "Videocard vendor"
        BoardName   "NVIDIA GeForce 3 (generic)"
        VideoRam    65536
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

aammdd

上面是我的XF86config文件,南北兄看看了.

北南南北

这样。。。在/etc/modules.conf中加如下两行
/sbin/modprobe usbmouse
/sbin/modprobe mousedev

如果还是不行，就加在/etc/rc.d/rc.local文件中。。

祝好运

xiangfeng

还是不行呀,郁闷.有没有在RH9下成功使用USB鼠标的兄弟分享一下经验了.