关于9200SE显卡的问题???

caicheng

:help [root@localhost tmp]# rpm -ivh fglrx-4.3.0-3.14.6.i386.rpm
Preparing... ########################################### [100%]
file /usr/X11R6/lib/libGL.so.1.2 from install of fglrx-4.3.0-3.14.6 conflicts with file from package XFree86-Mesa-libGL-4.3.0-42
我装了显卡驱动(9200SE)怎么和没装一样屏幕怎么还闪?是不是哪儿要该一下呢?

ptr

Post by caicheng
:
file /usr/X11R6/lib/libGL.so.1.2 from install of fglrx-4.3.0-3.14.6 conflicts with file from package XFree86-Mesa-libGL-4.3.0-42

This line indecate that your driver has not been installed.

caicheng

为什么会冲突呢?是我的驱动的版本和XFree86的版本不符吗?(我在www.ati.com上只找到这一个)还是其他原因?如果是第一个原因请给个链接!如果是其他原因请帮我解决!

ptr

Pls try to add this option:
--force
This may help.

caicheng

听说就是装上了驱动，还是要改配置文件是吗？？？我的显示器是philips107F6（17')应该这么改呢？？？

ptr

It depends on the pixel rate of your CRT monitor. My MAG FDII has a 203 MHz pixel rate.
So I have the synchronization:
Horizontal: 30 to 95 kHz
Vertical: 50 to 160 Hz

I think  for your monitor, it should be something like:
Horizontal: 30 to 75 kHz
Vertical: 50 to 120 Hz

Try to modify your /etc/X11/XF86config to accommodate your monitor.
Remember to backup your XF86config first,  

Freesnake

我修改后画面花了，进不到系统里……请问怎么恢复备份的文件？

ptr

Do you have a copy of the original XF86config?
If so, simply issue this command:
#cp orgrinal_XF86config XF86config
(substitute 'orignal_XF86config' to the file name that contains a copy of your original XF86config.)

If you don't have a copy of the original XF86config,
Just try to undo the changes you made.
To enter a console, press Ctrl+Alt+F1.
#vi /etc/X11/XF86config

Freesnake

备份是有，关键是开机后直接就往X下走，然后看见图形界面后什么提示都没有就已经花屏幕了……我根本进不到任何东西里，连命令行的界面都跳不进去……按了Ctrl+Alt+F1也没有任何反应……

ptr

when the grub menu comes pres 'e' on the kernel which u want 2 boot and
then on the kernel=/boot/kernel.img  line just add 'single' at the end.

i.e.
kernel (hd0,0)/vmlinuz root=/dev/hda8 devfs=mount hdb=ide-scsi vga=794 single

this will initate the single user mode, and it's a console.