LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 837|回复: 4

分辨率问题,望高手指教

[复制链接]
发表于 2005-1-19 13:47:18 | 显示全部楼层 |阅读模式
系统为fc 1
p4 3.0
内存 2g
主板 i865
显示器 dell m783p

状况为无论如何修改/etc/X11/XF86config分辨率都是640x480 85hz
intel i865 graphic driver 的rpm包已经装了

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Dell M782p"
        DisplaySize  300        230
        HorizSync    30.0 - 85.0
        VertRefresh  50.0 - 160.0
        Option      "dpms"
EndSection
Section "Device"
        Identifier  "Videocard0"
        Driver      "i810"
        VendorName  "Videocard vendor"
        BoardName   "Intel 865"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     16
        SubSection "Display"
                Depth     16
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

是不是fc1 和i865 芯片有冲突?
发表于 2005-1-19 19:51:33 | 显示全部楼层
把/var/log/下的xorg.conf贴出来看一下
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-1-19 21:14:08 | 显示全部楼层

/var/log没有xorg...只有XFree86*

只有XFree86.0.log  XFree86.0.log.old  XFree86.1.log  XFree86.setup.log
前3个都有一千多行,最后一个一百多行
下面的是XFree86.setup.log中的一段,应该是你说的那个出错信息

Module Loader present
OS Kernel: Linux version 2.4.22-1.2115.nptl (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 Wed Oct 29 15:42:51 EST 2003                                                                  
Markers: (--) probed, (**) from config file, (==) default setting,
           (++) from command line, (!!) notice, (II) informational,                  
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/dev/null", Time: Tue Jan 18 11:46:10 2005                 
(++) Using config file: "/tmp/@6585.1xf86config"
(EE) I810(0): No Video BIOS modes for chosen depth.                        
(EE) Screen(s) found, but none have a usable configuration.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-1-19 21:28:46 | 显示全部楼层

这是XFree86.0.log中的一段

(II) I810(0): Monitor0: Using hsync range of 30.00-85.00 kHz
(II) I810(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) I810(0): Not using mode "1024x768" (no mode of this name)
(II) I810(0): Not using mode "800x600" (no mode of this name)
(II) I810(0): Increasing the scanline pitch to allow tiling mode (640 -> 1024).
(--) I810(0): Virtual size is 640x480 (pitch 1024)
(**) I810(0): *Built-in mode "640x480"
(II) I810(0): Attempting to use 85Hz refresh for mode "640x480" (41)
(**) I810(0): Display dimensions: (300, 230) mm
(**) I810(0): DPI set to (54, 53)
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-1-19 21:58:50 | 显示全部楼层

解决啦

原来是主板默认集成显卡只分配1m显存(晕死,还有这样默认的)
改为8m(dell定制机子,bios中最多这么大)就ok啦
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表