有没有谁在linux下成功用手机上网？

potator

我的是 LG6260 cdma手机，不知道有没有驱动啊？！

冷风

有驱动没用的，还需要应用软件支持

xianxsd

只要驱动就可以，不要软件，和普通猫一样！
you have to use wvdial system in linux.. I am assuming that your Reliance mobile phone is detected as "Samsung CDMA technology by Kudzu"
So your next step is to configure wvdial..
Now creat a file in /etc named wvdial.conf with the following contents !!
Code:

[Modem0]
Modem=/dev/input/ttyS0
Baud=115200
SetVolume=0
Dial Command = ATDT
init1=ATZ
FlowControl= Hardware (CRTSCTS)
[Dialer reliance]
Username= Ph No.
Password= Ph No.
Phone=#777
Stupid Mode= 1
Inherits = Modem0


Here in above code change /dev/input/ttyS0 to your computer's com port if you are using serial cable other if you are using USB then replace that with ttyACM2 or ttyACMx here x= you USB port.

Now to dial use..
Code:
wvdial reliance

and you should be up.. if it don't work see whether you are using right ports..



我试试，没成功，希望对你有帮助！！！
如果成功告诉我！

arts

我也在考虑如何使用红外线+手机+gprs上网.
总是无法连接红外设备.