安装VIA EPIA5000主板网卡时提示,诸如:insmod:unresolved symbol: pci_system_callR

sybaselu

安装VIA EPIA5000主板网卡时提示,诸如:insmod:unresolved symbol: pci_system_callRG30001234一大片错误,什么原因?如:
[root @root root ]#insmod rhinefet.o
insmod:unresolved symbol: pci_system_callRG30001234
insmod:unresolved symbol: register_system_callRG30001234
insmod:unresolved symbol: pci_system_callRG308798098
insmod:unresolved symbol: isa_tem_callRG30001234
(具体的错误不太清楚)
kernel:2.4.18
maiboard:VIA epia 5000(其他的都是集成的)

sybaselu

情况大概如下:
[root@root root]#insmod rhinefet.o
Using
> /lib/modules/2.4.18-sh/kernel/drivers/net/snull.
> | insmod: unresolved symbol kmalloc_R93d4cfe6
> | insmod: unresolved symbol
> skb_under_panic_R69955398
> | insmod: unresolved symbol
> register_netdev_R09e03f58
> | insmod: unresolved symbol eth_type_trans_R0a4e7a1c
> | insmod: unresolved symbol
> unregister_netdev_R98eda3f8
> | insmod: unresolved symbol printk_Rdd132261
> | insmod: unresolved symbol __udivsi3_i4
> | insmod: unresolved symbol memcpy_R11f7ce5e
> | insmod: unresolved symbol jiffies_R0da02d67
> | insmod: unresolved symbol alloc_skb_R0177038c
> | insmod: unresolved symbol softnet_data_R258cb892
> | insmod: unresolved symbol
> cpu_raise_softirq_R4d09166c
> | insmod: unresolved symbol __kfree_skb_R1741771d
> | insmod: unresolved symbol memset_R2bc95bd4
> | insmod: unresolved symbol kfree_R037a0cba
> | insmod: unresolved symbol netif_rx_R8316ccd0
> | insmod: unresolved symbol ether_setup_R586ea93a
> | insmod: unresolved symbol skb_over_panic_R4bb59969
> |
> | can someone please tell me what's wrong with this,
> | and how to fix this without chaning Linux

sybaselu

是不是关于驱动和内核的版本不同，在内核配置选项中关掉那三项吗？