新手求助 xorg-x11

suran · 发表于 2009-1-12 15:37:58

高手指点一下
参考http://www.gentoo.org/doc/zh_cn/xorg-config.xml
安装Xorg-x11,在Xorg -configure创建xorg.conf时出错

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux sran.x 2.6.27-gentoo-r7 #3 SMP Mon Jan 12 14:36:10 CST 2009 i686
Build Date: 12 January 2009
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 15:08:32 2009
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e35c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,0369 card 10de,cb84 rev a1 class 05,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0360 card 10de,cb84 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0368 card 10de,cb84 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,036c card 10de,cb84 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,036d card 10de,cb84 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,036e card 10de,cb84 rev a1 class 01,01,8a hdr 00
(II) PCI: 00:05:0: chip 10de,037f card 10de,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:05:1: chip 10de,037f card 10de,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:05:2: chip 10de,037f card 10de,cb84 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:06:0: chip 10de,0370 card 0000,0000 rev a2 class 06,04,01 hdr 81
(II) PCI: 00:06:1: chip 10de,0371 card 16f3,8891 rev a2 class 04,03,00 hdr 80
(II) PCI: 00:08:0: chip 10de,0373 card 10de,cb84 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 10de,0376 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,0374 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,0378 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,0375 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 10de,0377 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 07:00:0: chip 1002,7293 card 0000,0000 rev 9a class 03,00,00 hdr 80
(II) PCI: 07:00:1: chip 1002,72b3 card 0000,0001 rev 9a class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:6:0), (0,1,1), BCTRL: 0x0a04 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdb00000 - 0xfdbfffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:11:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfd9fffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:12:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfd800000 - 0xfd8fffff (0x100000) MX
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfd700000 - 0xfd7fffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:13:0), (0,5,5), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfd600000 - 0xfd6fffff (0x100000) MX
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xfd500000 - 0xfd5fffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:14:0), (0,6,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00005000 - 0x000050ff (0x100) IX
[1] -1 0 0x00005400 - 0x000054ff (0x100) IX
[2] -1 0 0x00005800 - 0x000058ff (0x100) IX
[3] -1 0 0x00005c00 - 0x00005cff (0x100) IX
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xfd400000 - 0xfd4fffff (0x100000) MX
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xfd300000 - 0xfd3fffff (0x100000) MX
(II) PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:15:0), (0,7,7), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 7 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX
(II) Bus 7 non-prefetchable memory range:
[0] -1 0 0xfd200000 - 0xfd2fffff (0x100000) MX
(II) Bus 7 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(--) PCI:*(7:0:0) ATI Technologies Inc Radeon X1650 Series rev 154, Mem @ 0xe0000000/28, 0xfd2f0000/16, I/O @ 0x4c00/8
(--) PCI: (7:0:1) ATI Technologies Inc ATI Radeon X1650 Series Secondary rev 154, Mem @ 0xfd2e0000/16
Missing output drivers. Configuration failed.

还有就是USE标记里，我是这样写的，不知道对不
INPUT_DEVICES="keyboard mouse" #鼠标好像应该是mice?
VIDEO_CARDS="fglrx"

昨天晚上六点开始安装，编译完内核，都十二点了
到目前为止实在是不知道该怎么整了....

cliffordli · 发表于 2009-1-12 16:42:56

Post by suran;1937341

还有就是USE标记里，我是这样写的，不知道对不
INPUT_DEVICES="keyboard mouse" #鼠标好像应该是mice?
VIDEO_CARDS="fglrx"

ATI 显卡? 我的也是, 试一下 VIDEO_CARDS="radeon"

seven07years · 发表于 2009-1-13 14:11:06

我的是Ｎ卡　安这个的时候没出什么大错　
　路过一下

seven07years · 发表于 2009-1-13 14:13:57

我Ｘ１１安好了　　ＫＤＥ也安好了　但是　没有声音　郁闷当中

i13m · 发表于 2009-1-13 14:34:51

我不是用ati显卡的，只是根据你给的log稍微的分析一下。

如果你安装的是 xf86-video-ati，那么用xorgconfig生成xorg.conf
如果你安装的是 ati-drivers，那么应该用/opt/bin/aticonfig --initial --input=/etc/X11/xorg.conf生成xorg.conf

suran · 发表于 2009-1-13 22:52:45

Post by i13m;1937685
我不是用ati显卡的，只是根据你给的log稍微的分析一下。

如果你安装的是 xf86-video-ati，那么用xorgconfig生成xorg.conf
如果你安装的是 ati-drivers，那么应该用/opt/bin/aticonfig --initial --input=/etc/X11/xorg.conf生成xorg.conf

还是不行，决定重新安装，使用genkernel编译内核，总感觉是内核配置的问题
如果使用官方的驱动ati*.run,这个该怎么安装呢？要安装其它什么包吗？USE标记怎么写？

jiyongguang · 发表于 2009-1-13 23:43:23

内核有没有把
CONFIG_AGP=m
CONFIG_AGP_INTEL=m
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
这些选项打开？

gogonkt · 发表于 2009-1-14 00:05:25

gentoo 的官方文档中有ATI和桌面文档,建议先看一下,然后gentoo-wiki也有,相信兄弟看完后心里会清楚一点

suran · 发表于 2009-1-14 00:26:01

Post by jiyongguang;1937902
内核有没有把
CONFIG_AGP=m
CONFIG_AGP_INTEL=m
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
这些选项打开？

2.6.27-r7的内核，配置是参考2.6.19配置的，好像没有这几个选项

cliffordli · 发表于 2009-1-14 08:56:00

内核里面应有这些的吧?

   Device Drivers  --->
   Graphics support  --->
   <*> /dev/agpgart (AGP Support)  --->
   <*> ATI chipset support

--- Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)
<*> ATI Rage 128
<*> ATI Radeon

编好内核在你的/etc/make.conf 里面加上
VIDEO_CARDS="radeon"
来个emerge -uDN world 系统自动就装上驱动了, 我现在用的ATI显卡就是这样装的.

		自动登录	找回密码
密码			注册