LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 854|回复: 3

卸载u盘的问题

[复制链接]
发表于 2003-6-26 10:56:46 | 显示全部楼层 |阅读模式
我用的是Redhat 8.0,插上Allok U盘时有一串信息,可以检测到,版本是1。10的,但有is not claimed by any active driver信息。fdisk -??看到的信息是/dev/sda1的,但四个partition都有问题(has different physical/logical beginnings, has different physical/logical ends,does not end on cylinder boundary,),mount 上之后,使用正常,也可以unmount,但拔下u盘时就有kernel:uhci.c:ec00 : host controller halted,very bad信息。这是为什么?是否因为缺少即插即用服务?
发表于 2003-6-26 11:21:54 | 显示全部楼层
你用的是哪种即插即用服务?我知道的有两种,一个是hotplug,另一个是murasaki
 楼主| 发表于 2003-6-26 13:29:15 | 显示全部楼层

Redhat8.0自带的,应该是hotplug

rpm -q 得到的是hotplug-2002_04_01-3
               hotplug-2002_04_01-13
发表于 2003-6-26 20:56:59 | 显示全部楼层
我用的是Redhat 8.0,插上Allok U盘时有一串信息,可以检测到,版本是1。10的,但有is not claimed by any active driver信息。fdisk -??看到的信息是/dev/sda1的,但四个partition都有问题(has different physical/logical beginnings, has different physical/logical ends,does not end on cylinder boundary,),mount 上之后,使用正常,也可以unmount,但拔下u盘时就有kernel:uhci.c:ec00 : host controller halted,very bad信息。这是为什么?是否因为缺少即插即用服务?


我的MINI USB的盘,也是提示有错,不过mount上还是能用的,后来编了一次内核,问题就解决了很多。不过偶尔也是有错误,出现的次数比较少。

给我感觉还是内核方面的事。应该编译内核来解决。


建议用2.4.21的内核来试试看
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表