|
|
发表于 2004-9-2 09:16:16
|
显示全部楼层
最初由 simonnie 发表
我在dell的2400n中安装fc1，非常顺利，能自动识别845gv芯片组内置的显卡和dell显示器，可以进入图形安装界面。但是fc2不行，无法进入图形界面，只能用text界面进行安装。
其实安装用text模式也不错，好多发行版都是text模式安装的。这样安装方法我认为还是比较简单的，速度也快。只要熟悉就好了。
但安装好后不能进入图形界面，我感觉还是xorg 或者驱动的事。大多是出在驱动上的。
应该从驱动上找办法。
我记得本讨论区的精华区中有。
对于redhat 7.2来说不能安装显示卡，看说明得出就是内核版本太低，xfree86版本太低的原因。
驱动下载地址：
ftp://aiedownload.intel.com/df-s ... 0040607_%20i386.rpm
或者：
http://aiedownload.intel.com/df- ... 0040607_%20i386.rpm
说明文档：
************************************************************
*
*
* Production Version Releases
*
* Intel(R) Graphics Driver for Linux
* Driver Revision: 20040607
*
*
*
* June 06, 2004
*
* NOTE: This document refers to systems containing the
* following Intel chipsets:
*
* Intel(R) 830M Chipset
* Intel(R) 830MG Chipset
* Intel(R) 845G Chipset
* Intel(R) 845GL Chipset
* Intel(R) 845GE Chipset
* Intel(R) 845GV Chipset
* Intel(R) 852GM Chipset
* Intel(R) 852GME Chipset
* Intel(R) 855GM Chipset
* Intel(R) 855GME Chipset
* Intel(R) 865G Chipset
* Intel(R) 915G Express Chipset
*
*
* Installation Information
*
* This document makes references to products developed by
* Intel. There are some restrictions on how these products
* may be used, and what information may be disclosed to
* others. Please read the Disclaimer section and contact
* your Intel field representative if you would like more
* information.
*
************************************************************
************************************************************
* DISCLAIMER: Intel is making no claims of usability,
* efficacy or warranty. The INTEL SOFTWARE LICENSE
* AGREEMENT contained herein completely defines the license
* and use of this software.
************************************************************
************************************************************
************************************************************
* CONTENTS OF THIS DOCUMENT
************************************************************
This document contains the following sections:
1. System Requirements
2. Localized Language Abbreviations
3. Installing the Software
4. Uninstalling the Software
5. Installation Switches Available
************************************************************
* 1. SYSTEM REQUIREMENTS
************************************************************
1. The system must contain one of the following Intel
Chipsets:
Intel(R) 830M Chipset
Intel(R) 830MG Chipset
Intel(R) 845G Chipset
Intel(R) 845GL Chipset
Intel(R) 845GE Chipset
Intel(R) 845GV Chipset
Intel(R) 852GM Chipset
Intel(R) 852GME Chipset
Intel(R) 855GM Chipset
Intel(R) 855GME Chipset
Intel(R) 865G Chipset
Intel(R) 915G Express Chipset
2. The software should be installed on systems with at
least 256 MB of system memory.
3. There should be sufficient hard disk space in the <TEMP>
directory on the system in order to install this
software.
************************************************************
* 2. LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************
The Intel(R) Graphics Driver for Linux for XFree86*
has not been localized to any language other than
U.S. English
************************************************************
* 3. INSTALLING THE SOFTWARE
************************************************************
General Installation Notes:
- The operating system must be installed prior to the
installation of the driver.
- This installation procedure is specific only to the
version of driver and installation file included in this
release.
- This procedure assumes that all of the software
associated with this release is located in the same
directory.
************************************************************
*3.a RPM INSTRUCTIONS
************************************************************
1. Ensure the X server is not currently running.
2. Ensure you are running one of the following distributions
with the appropriate kernel versions defined below:
a. Redhat* Enterprise Linux WS v3 with kernel 2.4.21-4.EL or
kernel 2.4.21-4.ELsmp.
b. SuSE* Linux Professional 9.1 with kernel 2.6.4-54.5
c. SuSE* Linux Professional 9.0 with kernel 2.4.21-144
d. Turbolinux* 10 Desktop with kernel 2.6.0-6
e. RedFlag* Linux Desktop 4.0 with kernel 2.4.20-8
f. Mandrake* 10 Official with kernel 2.6.3-7mdk
3. Go to the directory where you saved the driver package and type:
a. rpm -i driI915-1.0-20040607.i386.rpm
Note: The console prompt will reappear in a few moments
************************************************************
*3.b FINISHING UP (ALL PACKAGE TYPES)
************************************************************
1. Run the appropriate configuration tool to enable the driver
2. Example: Run Redhat's own configurator called 'redhat-config-xfree86'
from a terminal in Linux
a. Select the 'Advanced' tab at the top
b. Select the button 'Configure' against the 'Video Card Type'
c. Select the appropriate Intel chipset from the list
d. Set the 'Custom Video Memory Size' to '32MB'
e. Set 'Video Card Type' as 'Intel 865'
3. Log out of root or superuser
4. startx
************************************************************
* 4. UNINSTALLING THE SOFTWARE
************************************************************
No uninstallation script is provided
************************************************************
* 5. INSTALLATION SWITCHES AVAILABLE
************************************************************
No installation switches are provided
************************************************************
* 6. Dual Head Configuration Options
************************************************************
These options can be added to the Device section to further
configure dual head modes.
Option "MonitorLayout" "anystr"
Allow different monitor configurations. e.g. "CRT,LFP" will
configure a CRT on Pipe A and an LFP on Pipe B. Regardless of
the primary heads' pipe it is always configured as "< IPEA>,
<IPEB>". Additionally you can add different configurations
such as "CRT+DFP,LFP" which would put a digital flat panel and
a CRT on pipe A, and a local flat panel on pipe B. For single
pipe configurations you can just specify the monitors types on
Pipe A, such as "CRT+DFP" which will enable the CRT and DFP on
Pipe A. Valid monitors are CRT, LFP, DFP, TV, CRT2, LFP2, DFP2,
TV2 and NONE.
NOTE: Some configurations of monitor types may
fail, this depends on the Video BIOS and system configuration.
Default: Not configured, and will use the current head's pipe
and monitor.
Option "Clone" "boolean"
Enable Clone mode on alternate pipe. This will setup the second
head as a complete mirror of the monitor attached to the primary
pipe. NOTE: Video overlay functions will not work on the second
head in this mode. If you require this, then use the MonitorLayout
above and do (as an example) "CRT+DFP,NONE" to configure both a
CRT and DFP on Pipe A to achieve local mirroring and disable the
use of this option.
Default: Clone mode on the alternate pipe is disabled.
Option "CloneRefresh" "integer"
When the Clone option is specified we can drive the second monitor
at a different refresh rate than the primary.
NOTE: This override will only work if the Clone head is a CRT.
Default: 60. |
|
IP卡
狗仔卡
发表于 2004-8-31 09:24:00
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡