km400如何打开3d加速

zuosy

请问km400如何打开3d加速

北南南北

是显示卡？？？
能否把显示卡的芯片信息贴一下？

#lspci -v

zuosy

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host Bridge
        Subsystem: Unknown device 1849:3205
        Flags: bus master, 66MHz, medium devsel, latency 8
        Memory at e0000000 (32-bit, prefetchable)
        Capabilities: <available only to root>

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, medium devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: dde00000-dfefffff
        Prefetchable memory behind bridge: d5d00000-ddcfffff
        Capabilities: <available only to root>

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
        Subsystem: Unknown device 1849:3038
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at e400
        Capabilities: <available only to root>

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
        Subsystem: Unknown device 1849:3038
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at e800
        Capabilities: <available only to root>

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
        Subsystem: Unknown device 1849:3038
        Flags: bus master, medium devsel, latency 32, IRQ 169
        I/O ports at ec00
        Capabilities: <available only to root>

0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
        Subsystem: Unknown device 1849:3104
        Flags: bus master, medium devsel, latency 32, IRQ 169
        Memory at dfffff00 (32-bit, non-prefetchable)
        Capabilities: <available only to root>

0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
        Subsystem: Unknown device 1849:3177
        Flags: bus master, stepping, medium devsel, latency 0
        Capabilities: <available only to root>

0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: Unknown device 1849:0571
        Flags: bus master, medium devsel, latency 32, IRQ 255
        I/O ports at fc00
        Capabilities: <available only to root>

0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
        Subsystem: Unknown device 1849:9739
        Flags: medium devsel, IRQ 177
        I/O ports at e000
        Capabilities: <available only to root>

0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
        Subsystem: Unknown device 1849:3065
        Flags: bus master, medium devsel, latency 32, IRQ 185
        I/O ports at dc00
        Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
        Capabilities: <available only to root>

0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01) (prog-if 00 [VGA])
        Subsystem: Unknown device 1849:7205
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 193
        Memory at d8000000 (32-bit, prefetchable) [size=dfef0000]
        Memory at de000000 (32-bit, non-prefetchable) [size=16M]
        Expansion ROM at 00010000 [disabled]
        Capabilities: <available only to root>

北南南北

兄弟，是声卡不是显示卡？？？？

zuosy

当然是显卡了。

先谢了。

北南南北

是 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)

S3的显示卡
http://www.viaarena.com/default.aspx?PageID=2

根据自己的发行版，下载一下驱动

9122

确定你的内核，2.6没戏，2.4.x装上面的驱动

zuosy

内核是2.6的，没办法了吗？

9122

如果愿意的话，那就装个2.4.x的，先看看驱动的说明书，对应的内核只有几个版本，下面贴出来了，最好是自己编译，记得把source也装上

[PHP]
case "$KERNELVERSION" in
    2.4.2-2)
    OS=RedHat
    VER=7.1
    ;;
    2.4.7-10)
    OS=RedHat
    VER=7.2
    ;;
    2.4.18-3)
    OS=RedHat
    VER=7.3
    ;;
    2.4.18-14)
    OS=RedHat
    VER=8.0
    ;;
    2.4.20-8)
    OS=RedHat
    VER=9.0
    ;;
    2.4.18-6mdk)
    OS=Mandrake
    VER=8.2
    #gunzip -f /lib/modules/$KERNELVERSION/kernel/drivers/char/agp/agpgart.o.gz
    ;;
    2.4.19-16mdk)
    OS=Mandrake
    VER=9.0
    #gunzip -f /lib/modules/$KERNELVERSION/kernel/drivers/char/agp/agpgart.o.gz
    ;;
    2.4.25-7mdk)
    OS=Mandrake
    VER=9.1
    #gunzip -f /lib/modules/$KERNELVERSION/kernel/drivers/char/agp/agpgart.o.gz
    ;;
    2.4.19-4GB)
    OS=SuSE
    VER=8.1
    AUTOLOADFILE=/etc/init.d/boot.local
    OLDAUTOLOADFILE=/etc/init.d/boot.local.bak
    ;;
esac
echo install $OS $VER S3G KM400 driver
[/PHP]