菜鸟小问：关于neomagic的驱动替换问题

stevenson

小弟的600X(neomagix 256zx,4M的显卡)刚请进了FC3，想装MPlayer看DVD,可是配置enable-gui的时候因为X11没有打开通不过,不加enable-gui可以装上去，dan播放时也报错。安装文档里有提到替换的驱动和补丁，是FOR XFRee86，也没提到如何配置。对于FC3的xorg该怎么配置?
还望XDs指教
PS:这是enable-gui时configure的报错：
Error: X11 support required for GUI compilation

这是不带enable-gui的报错
  ************************************************
            **** Your system is too SLOW to play this!  ****
            ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
   - Try -ao sdl or use the OSS emulation of ALSA.
   - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
   - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
   - Don't try to play a big DVD/DivX on a slow CPU! Try -hardframedrop.
- Broken file
   - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
   - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
   - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.

A:  52.7 V:  35.0 A-V: 17.725 ct:  1.919 837/834 35% 24%  6.7% 737 0
Too many video packets in the buffer: (4096 in 8256766 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
a52: CRC check failed!
a52: error at resampling

Too many video packets in the buffer: (4096 in 8256766 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
A:  52.8 V:  62.9 A-V:-10.130 ct:  2.683 1507/1504 35% 19%  5.8% 737 0