救命啊

tz569053543

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux znet8 2.6.24-gentoo-r7 #1 SMP Fri Jul 10 07:49:44 CST 2009 x86_64
Build Date: 10 July 2009
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 10 18:22:56 2009
(EE) Unable to locate/open config file

New driver is "ati"
(==) Using default built-in configuration (55 lines)
(EE) open /dev/fb0: No such file or directory
(II) Module already built-in
(II) Module already built-in
finished output detect: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
in RADEONProbeOutputModes
after xf86InitialConfiguration
(II) Module already built-in
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 78750000
best_freq: 78750000
best_feedback_div: 350
best_ref_div: 60
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
disable montype: 1
(EE) AIGLX: Screen 0 is not DRI capable
enable montype: 1

waiting for X server to shut down disable montype: 1
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.

tz569053543

谁能告诉我怎么详细的解决  ！！

kpld

(EE) Unable to locate/open config file

forrestxz

我不是高手，据我折腾的结果，一般重新编译内核就解决。

哈哈，先听其他高手

亞利艾爾

(EE) open /dev/fb0: No such file or directory
(EE) AIGLX: Screen 0 is not DRI capable

没有config文件应该不是吧。现在的X不是都支持不用xorg.conf了吗？
这个怎么解决也……我不是A卡用户。

LongerZ

这标题起的~~~~~吓人。
ati的卡有点烦~

tz569053543

znet8 ~ # xorgcfg

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux znet8 2.6.24-gentoo-r7 #1 SMP Fri Jul 10 07:49:44 CST 2009 x86_64
Build Date: 10 July 2009
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Sat Jul 11 03:45:29 2009
List of video drivers:
        r128
        mach64
        ati
        radeon
        fbdev
        vesa
        vga
(++) Using config file: "/root/xorg.conf.new"
(II) Module already built-in


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'


X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux znet8 2.6.24-gentoo-r7 #1 SMP Fri Jul 10 07:49:44 CST 2009 x86_64
Build Date: 10 July 2009
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.8.log", Time: Sat Jul 11 03:45:31 2009
(++) Using config file: "/root/xorg.conf.new"
(II) Module already built-in
(II) Module already built-in
finished output detect: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
in RADEONProbeOutputModes
after xf86InitialConfiguration
(II) Module already built-in
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 78750000
best_freq: 78750000
best_feedback_div: 350
best_ref_div: 60
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
disable montype: 1
(EE) AIGLX: Screen 0 is not DRI capable
enable montype: 1
Error: Shell widget screenP has zero width and/or height
znet8 ~ # disable montype: 1
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 78750000
best_freq: 78750000
best_feedback_div: 350
best_ref_div: 60
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
disable montype: 1
(EE) AIGLX: Screen 0 is not DRI capable
enable montype: 1

亞利艾爾

http://www.linuxquestions.org/qu ... dri-capable-599336/
http://www.google.cn/search?hl=z ... DRI+capable&lr=

Google 上有很多……

nonplus

Post by 亞利艾爾;2005062
(EE) open /dev/fb0: No such file or directory
(EE) AIGLX: Screen 0 is not DRI capable

没有config文件应该不是吧。现在的X不是都支持不用xorg.conf了吗？
这个怎么解决也……我不是A卡用户。

我只看到这句....

1. X Window System Version 1.3.0
   
2. Release Date: 19 April 2007
   
3. X Protocol Version 11, Revision 0, Release 1.3

复制代码

亞利艾爾

没有看懂楼上什么意思。xorg-server版本？

楼主不行更新一下。