如何安装ADSL,求助

w.cool

大侠，我的adsl设备由utstartcom提供，用的是redhat10.2内核2.4.20-8，参照各位大侠所说却无法安装adsl（也可能是我实在太菜，也难怪刚开始接触linux肯定要多交学费），在用adsl-status命令时提示如下：Link is down ,Can't read pppoe pid file /var/run/pppoe-adsl.pid.pppoe，望指教
david.cui@qingdaonews.com   不胜感谢

aaccdd

添加xDsl连接：

用adsl-setup# adsl-setup,按照提示一步步填写即可；
====================================================================

源码:Welcome to the ADSL client setup.  First, I will run some checks on
your system to make sure the PPPoE client is installed properly...


LOGIN NAME

Enter your Login Name (default root):   ( 填写账户名)

INTERFACE

Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default eth0):   (上网用的网卡接口，默认eth0)

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
Enter the demand value (default no): (是按需拨号，还是持续连接；按需拨号，填写空闲时间，如60(秒)；默认持续连接)

DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: (域名解析服务器，可以填server，自动寻找；也可以直接填地址)

PASSWORD

Please enter your Password:
Please re-enter your Password: (输入口令并确认)

USERCTRL

Please enter 'yes' (two letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): (用户控制，yes允许普通用户启动、关闭连接；默认yes)

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
Choose a type of firewall (0-2):   (防火墙规则，0-无有，1-基本工作站，2-局域网网关；一般选1就行)

Start this connection at boot time

Do you want to start this connection at boot time?
Please enter no or yes (default no): (是否随系统启动，如果包月yes)

** Summary of what you entered **

Ethernet Interface: eth0
User name:          *********
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        STANDALONE
User Control:       yes
Accept these settings and adjust configuration files (y/n)? (是否接受这些设置，并调整配置文件)

Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0
Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets
  

Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'
to bring it down.
Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'
to see the link status. (配置完成，启动xdsl连接用 /sbin/ifup ppp0， 关闭 /sbin/ifdown ppp0；查看状态 /sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0)