FC2下我的刻录机认不出来，哪位帮帮忙？

gorf · 发表于 2004-7-17 16:03:47

我的刻录机是BenQ的DVD刻录机。ide口的，在FC2下不认。
我的grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You do not have a /boot partition.  This means that
#       all kernel and initrd paths are relative to /, eg.
#       root (hd0,2)
#       kernel /boot/vmlinuz-version ro root=/dev/hda3
#       initrd /boot/initrd-version.img
#boot=/dev/hda
default=0
timeout=10
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
title Fedora Core (2.6.6-1.435)
      root (hd0,2)
      kernel /boot/vmlinuz-2.6.6-1.435 ro root=LABEL=/ hdd=ide-scsi rhgb quiet       initrd /boot/initrd-2.6.6-1.435.img
title Other
      rootnoverify (hd0,0)
      chainloader +1

我运行scanbus的结果：
[root@bigmonk mldonkey-2.5.21]# cdrecord --scanbus
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c       1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus1:
      1,0,0 100) 'ATAPI-CD' 'ROM-DRIVE-52MAX ' '52B4' Removable CD-ROM
      1,1,0 101) *
      1,2,0 102) *
      1,3,0 103) *
      1,4,0 104) *
      1,5,0 105) *
      1,6,0 106) *
      1,7,0 107) *
另一结果：
[root@bigmonk mldonkey-2.5.21]# cdrecord --scanbus dev=ATAPI
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
scsibus0:
      0,0,0    0) 'ATAPI-CD' 'ROM-DRIVE-52MAX ' '52B4' Removable CD-ROM
      0,1,0    1) *
      0,2,0    2) *
      0,3,0    3) *
      0,4,0    4) *
      0,5,0    5) *
      0,6,0    6) *
      0,7,0    7) *
认出来的设备是我的只读光驱hdc
[root@bigmonk mldonkey-2.5.21]# dmesg|grep hdc
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc

MA, hdd

MA
hdc: ATAPI-CD ROM-DRIVE-52MAX, ATAPI CD/DVD-ROM drive
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
其实刻录机是hdd
[root@bigmonk mldonkey-2.5.21]# dmesg|grep hdd
Kernel command line: ro root=LABEL=/ hdd=ide-scsi rhgb quiet
ide_setup: hdd=ide-scsi
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc

MA, hdd

MA
hdd: ATAPI DVD+RW 4X4X12, ATAPI CD/DVD-ROM drive
看看哪位能帮帮我。

cobranail · 发表于 2004-7-18 12:09:05

用k3b试试看

gorf · 发表于 2004-7-18 20:23:23

试过了也不认，他的基础应该也是cdrecord.

gorf · 发表于 2004-7-20 05:47:21

自顶一下

llw318 · 发表于 2004-7-20 09:08:38

我原来也安装了FC2,刻录机也不知道有没有认出来，反正一起动K3B，进行到扫描CD设备就100%地死在那……

gorf · 发表于 2004-7-20 16:15:22

我原来在老版本下能认的

llw318 · 发表于 2004-7-20 17:16:58

是呀！
我在FC1和以前的RH上一点事都没有。

qing · 发表于 2004-7-20 17:37:21

[PHP]hdd: ATAPI DVD+RW 4X4X12, ATAPI CD/DVD-ROM drive[/PHP]

这是什么??

不是认出来了..吗??

cdrecode dev=/dev/hdd xx.iso

来刻录吧....

gorf · 发表于 2004-7-20 21:02:53

还是不行，结果如下：
[root@bigmonk willburn]# cdrecord dev=/dev/hdd IBM.Rational.Solutions.V2003.CD1.\[VeryCD.com\].iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
cdrecord: No such device or address. Cannot open '/dev/hdd'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root@bigmonk willburn]#

qing · 发表于 2004-7-20 21:07:25

用什么版本的内核？？

加载scsi...

cdrecord: No such device or address. Cannot open '/dev/hdd'. Cannot open SCSI driver.

		自动登录	找回密码
密码			注册

FC2下我的刻录机认不出来，哪位帮帮忙？

浏览过的版块