gentoo桌面安装提问

smz0102

各位，装gentoo桌面遇到问题了，帮忙啊！
文本已经装好
http://www.gentoo.org/doc/zh_cn/ ... �是按这个装的
Nvidia显卡
# emerge -pv xorg-server
x11-base/xorg-server-1.3.0.0-r5  USE="dri nptl xorg -3dfx -debug -dmx -ipv6 -kdrive -minimal -sdl -xprint" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom" VIDEO_CARDS="nvidia -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -glint -i128 -i740 -i810 (-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -nv -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -vga -via -vmware -voodoo" 0 kB

ocalhost ~ # cat /etc/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="${CFLAGS}"
# This should not be changed unless you know exactly what you are doing.  You
# should probably be using a different stage, instead.
CHOST="i686-pc-linux-gnu"
USE="-gtk -gnome qt kde dvd alsa cdr"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="dri -ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -xprint"
INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom"
VIDEO_CARDS="nvidia -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -glint -i128 -i740 -i810 (-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -nv -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -vga -via -vmware -voodoo"


#emerge xorg-x11      这个 装好了
但是执行下面的显示如下
localhost ~ # Xorg -configure

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.23-gentoo-r8 #1 SMP Fri Feb 29 00:06:40 CST 2008 i686
Build Date: 29 February 2008
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 29 02:24:58 2008
Missing output drivers.  Configuration failed.
请问为什么？

抽烟斗的狗

Nvidia 显卡型号和版本要匹配，把你的显卡型号和安装的Nvidia的版本号报上来~~~~~
还有在 /var/log/Xorg.0.log 找找线索

三翻领

USE写在一行里，否则前面的可能无效

zhllg

贴emerge --info，而不要贴make.conf
如果你不觉得麻烦就两个都贴

晨想

nvidia 还是 nv？
我都是手动 emerge nvidia-drivers 的。
要么就是 emerge xf86-video-nv

smz0102

不好意思这几天忙！来晚了
下面是emerge --info，make.conf
localhost ~ # emerge --info
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-acecad'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-aiptek'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-calcomp'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-citron'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-digitaledge'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-dmc'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-dynapro'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-elo2300'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-elographics'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-evdev'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-fpit'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-hyperpen'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-jamstudio'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-joystick'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-magellan'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-microtouch'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-mutouch'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-palmax'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-penmount'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-spaceorb'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-summa'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-synaptics'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-tek4957'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-ur98'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-vmmouse'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-void'
Invalid '-' operator in non-incremental variable 'INPUT_DEVICES': '-wacom'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-apm'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-ark'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-chips'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-cirrus'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-cyrix'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-dummy'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-epson'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-fbdev'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-fglrx'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-glint'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i128'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i740'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-i810'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-imstt'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-mach64'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-mga'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-neomagic'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-nsc'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-nv'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-r128'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-radeon'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-rendition'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-s3'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-s3virge'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-savage'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-siliconmotion'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-sis'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-sisusb'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-tdfx'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-tga'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-trident'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-tseng'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-v4l'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-vesa'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-vga'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-via'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-vmware'
Invalid '-' operator in non-incremental variable 'VIDEO_CARDS': '-voodoo'
Portage 2.1.2.2 (default-linux/x86/2007.0, gcc-4.1.1, glibc-2.5-r0, 2.6.23-gentoo-r8 i686)
=================================================================
System uname: 2.6.23-gentoo-r8 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+
Gentoo Base System release 1.12.9
Timestamp of tree: Thu, 28 Feb 2008 07:16:01 +0000
app-shells/bash:     3.1_p17
dev-lang/python:     2.4.3-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/baselayout: 1.12.9
sys-apps/sandbox:    1.2.17
sys-devel/autoconf:  2.61
sys-devel/automake:  1.10
sys-devel/binutils:  2.16.1-r3
sys-devel/gcc-config: 1.3.14
sys-devel/libtool:   1.5.22
virtual/os-headers:  2.6.17-r2
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="acl berkdb bitmap-fonts cli cracklib crypt cups dri fortran gdbm gpm iconv isdnlog midi mudflap ncurses nls nptl nptlonly openmp pam pcre perl pppd python readline reflection session spl ssl tcpd truetype-fonts type1-fonts unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="nvidia (-impact) (-newport) (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx)"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


localhost ~ # cat /etc/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="${CFLAGS}"
# This should not be changed unless you know exactly what you are doing.  You
# should probably be using a different stage, instead.
CHOST="i686-pc-linux-gnu"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="dri -ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -xprint"
INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom"
VIDEO_CARDS="nvidia -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -glint -i128 -i740 -i810 (-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -nv -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -vga -via -vmware -voodoo"

zhllg

这两个变量写错了
你需要的就写上，不需要的不要写上再加-

INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom"
VIDEO_CARDS="nvidia -apm -ark -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -glint -i128 -i740 -i810 (-impact) -imstt -mach64 -mga -neomagic (-newport) -nsc -nv -r128 -radeon -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vesa -vga -via -vmware -voodoo"

smz0102

谢谢版主
我修改了
localhost ~ # cat /etc/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="${CFLAGS}"
# This should not be changed unless you know exactly what you are doing.  You
# should probably be using a different stage, instead.
CHOST="i686-pc-linux-gnu"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="dri -ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -xprint"
INPUT_DEVICES="keyboard mouse"
VIDEO_CARDS="nvidia"

localhost ~ # emerge --info
Portage 2.1.2.2 (default-linux/x86/2007.0, gcc-4.1.1, glibc-2.5-r0, 2.6.23-gentoo-r8 i686)
=================================================================
System uname: 2.6.23-gentoo-r8 i686 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+
Gentoo Base System release 1.12.9
Timestamp of tree: Thu, 28 Feb 2008 07:16:01 +0000
app-shells/bash:     3.1_p17
dev-lang/python:     2.4.3-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/baselayout: 1.12.9
sys-apps/sandbox:    1.2.17
sys-devel/autoconf:  2.61
sys-devel/automake:  1.10
sys-devel/binutils:  2.16.1-r3
sys-devel/gcc-config: 1.3.14
sys-devel/libtool:   1.5.22
virtual/os-headers:  2.6.17-r2
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="acl berkdb bitmap-fonts cli cracklib crypt cups dri fortran gdbm gpm iconv isdnlog midi mudflap ncurses nls nptl nptlonly openmp pam pcre perl pppd python readline reflection session spl ssl tcpd truetype-fonts type1-fonts unicode x86 xorg zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="nvidia"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, MAKEOPTS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY
但是还是不行
localhost ~ # Xorg -configure

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.23-gentoo-r8 #1 SMP Fri Feb 29 00:06:40 CST 2008 i686
Build Date: 29 February 2008
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  5 21:58:22 2008
Missing output drivers.  Configuration failed.

localhost ~ # cat /var/log/Xorg.0.log

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux localhost 2.6.23-gentoo-r8 #1 SMP Fri Feb 29 00:06:40 CST 2008 i686
Build Date: 29 February 2008
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  5 21:58:22 2008
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81de4a0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.2
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.3.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,03ea card 10de,cb84 rev a1 class 05,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,03e0 card 10de,cb84 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,03eb card 1462,7309 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:01:2: chip 10de,03f5 card 1462,7309 rev a2 class 05,00,00 hdr 80
(II) PCI: 00:02:0: chip 10de,03f1 card 1462,7309 rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,03f2 card 1462,7309 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,03f3 card 0000,0000 rev a1 class 06,04,01 hdr 01
(II) PCI: 00:05:0: chip 10de,03f0 card 1462,7309 rev a2 class 04,03,00 hdr 80
(II) PCI: 00:06:0: chip 10de,03ec card 1462,7309 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,03ef card 1462,7309 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10de,03f6 card 1462,7309 rev a2 class 01,01,85 hdr 80
(II) PCI: 00:09:0: chip 10de,03e8 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 10de,03e9 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,03e9 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,03d1 card 1462,7309 rev a2 class 03,00,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:4:0), (0,1,1), BCTRL: 0x0202 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:9:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:11:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:12:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,4), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0       0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
        [0] -1  0       0x00000000 - 0xffffffff (0x0) MX
(--) PCI:*(0:13:0) nVidia Corporation GeForce 6100 nForce 405 rev 162, Mem @ 0xde000000/24, 0xc0000000/28, 0xdd000000/24, BIOS @ 0xdffc0000/17
Missing output drivers.  Configuration failed.

f.s.vivian

我用的也是nvidia-drivers
1.记得装了nvidia-drivers后要运行eselect opengl什么的，有提示信息。
如果楼主没运行过，再emerge nvidia-drivers一遍，完了照提示做一下。
2.如果不用nvidia驱动，Xorg -configure配置可以起得来么？
我第一次装的时候，没用nvidia的任何驱动，x也可以运行，只是移动窗口有拖影，也就是没有所谓的硬件加速罢了。
如果可以，问题的范围还能再缩小些。

axlrose

发错了