U盘不能挂载，看不明白错误信息

wangwentao24

scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sd 3:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 3:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
spurious 8259A interrupt: IRQ7.
Unable to load NLS charset iso8859-1
FAT: IO charset iso8859-1 not found
Unable to load NLS charset iso8859-1
FAT: IO charset iso8859-1 not found
Unable to load NLS charset iso8859-1
FAT: IO charset iso8859-1 not found
在桌面上显示了。可是不能看里面的东西。
内核里我也配置了对u盘的支持，和对vfat系统文件的支持。

health_kxy

你看看内核里面NLS的支持。 就是File system->native language support里面，是不是有中文的那个支持。iso8859-1的这个支持是否选了。

Hosanna

你是用什么挂载的?看样子你是用默认的编码.
如果用命令行则用-o iocharset=utf8,如果是用其它软件,就看一下那个软件关于编码的相关说明.

另外,楼上所说的内核支持也是要的,一般中文的要选上UTF8或[和]cp936. iso8859-1这个是默认的西欧(??英文)的编码.

pjq

内核编码问题，仔细找找。