emerge -pv xorg-server 出错

linux_Eclipse

用的是VMware装，
★★★----------emerge -pv xorg-server 出错回显，说什么环形依赖问题。。。。---------------------------------------------------

mojian ~ # emerge -av xorg-x11

These are the packages that would be merged, in order:

Calculating dependencies... done!


[nomerge      ] x11-base/xorg-x11-7.4
[nomerge      ]  x11-base/xorg-server-1.5.3-r1  USE="hal ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -voodoo -xgi"
[ebuild  N    ]   sys-apps/hal-0.5.11-r6  USE="X crypt -acpi -apm -debug -dell -disk-partition -doc -laptop (-selinux)"
[ebuild  N    ]    dev-python/pyxf86config-0.3.34-r2
[ebuild  N    ]     x11-base/xorg-server-1.5.3-r1  USE="hal ipv6 nptl xorg -3dfx -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -voodoo -xgi"

* Error: circular dependencies:

('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') depends on
  ('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') (hard)
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') depends on
  ('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') (hard)
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') depends on
  ('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') (hard)

* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.

mojian ~ #


mojian ~ # emerge -av xorg-x11

These are the packages that would be merged, in order:

Calculating dependencies... done!


[nomerge      ] x11-base/xorg-x11-7.4
[nomerge      ]  x11-base/xorg-server-1.5.3-r1  USE="hal ipv6 nptl xorg -3dfx -d                        ebug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad -a                        iptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev -                        fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penm                        ount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom" VI                        DEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -fgl                        rx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (-ne                        wport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -savage                         -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (                        -sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via -v                        oodoo -xgi"
[ebuild  N    ]   sys-apps/hal-0.5.11-r6  USE="X crypt -acpi -apm -debug -dell -                        disk-partition -doc -laptop (-selinux)"
[ebuild  N    ]    dev-python/pyxf86config-0.3.34-r2
[ebuild  N    ]     x11-base/xorg-server-1.5.3-r1  USE="hal ipv6 nptl xorg -3dfx                         -debug -dmx -kdrive -minimal -sdl -tslib" INPUT_DEVICES="keyboard mouse -acecad                         -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evde                        v -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -p                        enmount -spaceorb -summa -synaptics -tek4957 -tslib -ur98 -vmmouse -void -wacom"                         VIDEO_CARDS="vmware -apm -ark -ast -chips -cirrus -cyrix -dummy -epson -fbdev -                        fglrx -geode -glint -i128 -i740 (-impact) -imstt -intel -mach64 -mga -neomagic (                        -newport) -nsc -nv -nvidia -r128 -radeon -radeonhd -rendition -s3 -s3virge -sava                        ge -siliconmotion -sis -sisusb (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb                        ) (-sunleo) (-suntcx) -tdfx -tga -trident -tseng -v4l -vermilion -vesa -vga -via                         -voodoo -xgi"

* Error: circular dependencies:

('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') depends on
  ('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') (hard)
('ebuild', '/', 'sys-apps/hal-0.5.11-r6', 'merge') depends on
  ('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') (hard)
('ebuild', '/', 'dev-python/pyxf86config-0.3.34-r2', 'merge') depends on
  ('ebuild', '/', 'x11-base/xorg-server-1.5.3-r1', 'merge') (hard)

* Note that circular dependencies can often be avoided by temporarily
* disabling USE flags that trigger optional dependencies.



★★★---------------make.conf----------------------------------------------------------------------------------------------------------
mojian ~ # emacs  /etc/make.conf

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
#CFLAGS="-O2 -march=i686 -pipe"
#CXXFLAGS="-O2 -march=i686 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
#CHOST="i686-pc-linux-gnu"
USE="alsa bash-completion bzip2 jpeg opengl ruby xscreensaver cjk X dbus gtk gnome hal avahi -kde -qt3 \
- qt4 -arts"
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
MAKEOPTS="-j3"
CC="gcc"
PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
#PATH="/usr/lib/portage/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
#PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
FEATURES="collision-protect parallel-fetch"
CCACHE_SIZE="2G"
CCACHE_DIR="/var/tmp/ccache"
AUTOCLEAN="yes"
VIDEO_CARDS="vmware"
#VIDEO_CARDS="nvidia"
ALSA_CARDS="hda-intel"
INPUT_DEVICES="keyboard mouse"
LINGUAS="en zh zh_CN"
ACCEPT_KEYWORDS="~x86"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo \
http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"

★★★--------------------emerge --info---------------------------------------------------------------------------------------------

mojian ~ # emerge --info

Portage 2.1.6.6 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.28-gentoo i686)
=================================================================
System uname: Linux-2.6.28-gentoo-i686-Intel-R-_Pentium-R-_D_CPU_2.80GHz-with-glibc2.0
Timestamp of tree: Fri, 16 Jan 2009 13:15:01 +0000
ccache version 2.4 [disabled]
app-shells/bash:     3.2_p17-r1
dev-lang/python:     2.4.4-r13
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache:     2.4-r8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.61-r1
sys-devel/automake:  1.10.1
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.24
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/terminfo /etc/udev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="collision-protect distlocks fixpackages parallel-fetch protect-owned sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/"
LDFLAGS="-Wl,-O1"
LINGUAS="en zh zh_CN"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="X acl alsa avahi bash-completion berkdb bzip2 cjk cli cracklib crypt cups dbus dri fortran gdbm gnome gpm gtk hal iconv ipv6 isdnlog jpeg midi mudflap ncurses nls nptl nptlonly opengl openmp pam pcre perl pppd python qt4 readline reflection ruby session spl ssl sysfs tcpd unicode x86 xorg xscreensaver zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en zh zh_CN" USERLAND="GNU" VIDEO_CARDS="vmware"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY

mojian ~ #

linux_Eclipse

yourfriend

xorg-sever 需要 hal
hal 需要 xorg-server
循环依赖

druggo

USE="-X" emerge hal
然后再 emerge xorg-x11

tlze

楼上正解，当时也是这样安装过来的。

linux_Eclipse

Post by druggo;1939081
USE="-X" emerge hal
然后再 emerge xorg-x11

emerge hal 完了以后，USE="X"要加回去吗？还是直接emerge xorg-x11????

kimux

看置顶帖

USE="-hal" emerge xorg-server && emerge -1uDN xorg-server hal && emerge xorg-x11

linux_Eclipse

Post by druggo;1939081
USE="-X" emerge hal
然后再 emerge xorg-x11

按照你的命令，USE去掉"X"，emerge hal，后emerge xorg-x11...........又出错了，
----------------------------USE去掉"X"后,emerge hal,然后再 emerge xorg-x11出错------------------

mojian mojian #：emerge xorg-x11


...
...
...

>>> Emerging (3 of 11) x11-apps/xinit-1.0.8-r3
* xinit-1.0.8.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                         [ ok ]
* checking ebuild checksums ;-) ...                                           [ ok ]
* checking auxfile checksums ;-) ...                                          [ ok ]
* checking miscfile checksums ;-) ...                                         [ ok ]
* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* ERROR: x11-apps/xinit-1.0.8-r3 failed.
* Call stack:
*               ebuild.sh, line   49:  Called pkg_setup
*   xinit-1.0.8-r3.ebuild, line   37:  Called die
* The specific snippet of code:
*                      die "You MUST build sys-apps/dbus with the X USE flag enabled."
*  The die message:
*   You MUST build sys-apps/dbus with the X USE flag enabled.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/die.env'.
*

>>> Failed to emerge x11-apps/xinit-1.0.8-r3, Log file:

>>>  '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'

* Messages for package x11-apps/xinit-1.0.8-r3:

* You MUST build sys-apps/dbus with the X USE flag enabled.
*
* ERROR: x11-apps/xinit-1.0.8-r3 failed.
* Call stack:
*               ebuild.sh, line   49:  Called pkg_setup
*   xinit-1.0.8-r3.ebuild, line   37:  Called die
* The specific snippet of code:
*                      die "You MUST build sys-apps/dbus with the X USE flag enabled."
*  The die message:
*   You MUST build sys-apps/dbus with the X USE flag enabled.
*
* If you need support, post the topmost build error, and the call stack if relevant.
* A complete build log is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/x11-apps/xinit-1.0.8-r3/temp/die.env'.
*

* GNU info directory index is up-to-date.

* IMPORTANT: 3 config files in '/etc' need updating.
* See the CONFIGURATION FILES section of the emerge
* man page to learn how to update config files.
mojian mojian # env-update && source /etc/profile
>>> Regenerating /etc/ld.so.cache...
mojian mojian #  Xorg -configure
bash: Xorg: command not found
mojian mojian #  Xorg -configure
bash: Xorg: command not found
mojian mojian # man 5 xorg.conf
No entry for xorg.conf in section 5 of the manual

mojian mojian #


----------------------------make.conf--------------------------------------------

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /etc/make.conf.example for a more detailed example.
#CFLAGS="-O2 -march=i686 -pipe"
#CXXFLAGS="-O2 -march=i686 -pipe"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
#CHOST="i686-pc-linux-gnu"
USE="alsa bash-completion bzip2 jpeg opengl ruby xscreensaver cjk dbus gtk gnome hal \
avahi -kde -qt3 - qt4 -arts"
CFLAGS="-O2 -march=i686 -pipe"
CXXFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
MAKEOPTS="-j3"
CC="gcc"
PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
#PATH="/usr/lib/portage/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
#PATH="/usr/lib/ccache/bin:/usr/i686-pc-linux-gnu/bin{PATH}"
FEATURES="collision-protect parallel-fetch"
CCACHE_SIZE="2G"
CCACHE_DIR="/var/tmp/ccache"
AUTOCLEAN="yes"
VIDEO_CARDS="vmware"
#VIDEO_CARDS="nvidia"
ALSA_CARDS="hda-intel"
INPUT_DEVICES="keyboard mouse"
LINGUAS="en zh zh_CN"
ACCEPT_KEYWORDS="~x86"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo \
http://mirror.averse.net/pub/gentoo/"
SYNC="rsync://mirror.averse.net/gentoo-portage"
-----------emerge --info---------------------------------------------------------------------------------


mojian mojian # emerge --info
Portage 2.1.6.6 (default/linux/x86/2008.0, gcc-4.1.2, glibc-2.6.1-r0, 2.6.28-gentoo i6                      86)
=================================================================
System uname: Linux-2.6.28-gentoo-i686-Intel-R-_Pentium-R-_D_CPU_2.80GHz-with-glibc2.0
Timestamp of tree: Fri, 16 Jan 2009 13:15:01 +0000
ccache version 2.4 [disabled]
app-shells/bash:     3.2_p17-r1
dev-lang/python:     2.4.4-r13
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache:     2.4-r8
sys-apps/baselayout: 1.12.11.1
sys-apps/sandbox:    1.2.18.1-r2
sys-devel/autoconf:  2.61-r1
sys-devel/automake:  1.9.6-r2, 1.10.1
sys-devel/binutils:  2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool:   1.5.24
virtual/os-headers:  2.6.23-r3
ACCEPT_KEYWORDS="x86 ~x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/terminfo /etc/ud                      ev/rules.d"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="collision-protect distlocks fixpackages parallel-fetch protect-owned sandbox                       sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo http://mirror.averse.net/pub/gentoo/                      "
LDFLAGS="-Wl,-O1"
LINGUAS="en zh zh_CN"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --forc                      e --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --                      exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://mirror.averse.net/gentoo-portage"
USE="acl alsa avahi bash-completion berkdb bzip2 cjk cli cracklib crypt cups dbus dri                       fortran gdbm gnome gpm gtk hal iconv ipv6 isdnlog jpeg midi mudflap ncurses nls nptl n                      ptlonly opengl openmp pam pcre perl pppd python qt4 readline reflection ruby session s                      pl ssl sysfs tcpd unicode x86 xorg xscreensaver zlib" ALSA_CARDS="hda-intel" ALSA_PCM_                      PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplu                      g ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm soft                      vol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_                      default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner auth                      z_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filt                      er file_cache filter headers include info log_config logio mem_cache mime mime_magic n                      egotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" EL                      IBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz c                      fontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en zh zh_CN" USERLAND                      ="GNU" VIDEO_CARDS="vmware"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, LC_ALL, PO                      RTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY

linux_Eclipse

Post by kimux;1939122
看置顶帖

USE="-hal" emerge xorg-server && emerge -1uDN xorg-server hal && emerge xorg-x11

我再把"X"加到USE里，试试你的：）

kimux

Post by linux_Eclipse;1939180
我再把"X"加到USE里，试试你的：）

我就是这 么干的...

新装的gentoo

除了安装xorg-server遇到循环依赖.. 其他一切正常