[解决]升级了一下系统，进入x之后键盘鼠标不能动了

easycat

遇到这种问题真的很郁闷，只能重启系统重启系统。

easycat

遇到这种问题真的很郁闷，只能重启系统重启系统。
http://www.linuxsir.cn/bbs/thread351668.html
参考了这个帖子，还是无效。

[如何解决]

Post by xcxxb;2008625
参考 http://www.linuxsir.cn/bbs/post2008624-8.html
简言之：可以升级新的hal，但不要用新的hal.conf

7dehao

qlist -I -C x11-drivers/
把显示的软件都重新编译一边，然后再startx

hihihihi

1. Section "ServerLayout"
2.     .........
3.     Option         "AllowEmptyInput" "no"
4. EndSection

复制代码

suddenkiller

现在好像xorg.conf里都不用写输入设备的动西了，我用的是xf86-input-evdev，全由它控制，挂载设备的工作都交给hal，配置在/etc/hal/fdi/policy/下。

DonkeyTail

我也碰到这个问题了，用USE="-hal" emerge xorg-server
后就好了。
但是thunar也必须去掉hal，否则没法启动，不知道为什么

ak47wj

最新的hal 0.5.13有Bug，无法监测新插入的输入设备，在package.mask中mask掉，使用旧的hal就没事了

anarchist

重新编译一下xf86-input-evdev

LongerZ

综合起来试试：
1.hal USE标志
2.启用evdev支持，包括内核和xorg-server
3.安装xf86-input-evdev
4.

Post by hihihihi;2008578

1. Section "ServerLayout"
   
2.     .........
   
3.     Option         "AllowEmptyInput" "no"
   
4. EndSection

复制代码

qlist -I -C x11-drivers/
或者直接mv /etc/X11/xorg.conf ./
~~~~~
startx

xcxxb

我有个最简单的方法，升级hal后，etc-update时不要覆盖掉原来的/etc/dbus-1/system.d/hal.conf 。
如果已经覆盖掉，替换回去
附我的旧hal.conf：

<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

  <!-- This configuration file specifies the required security policies
       for the HAL to work. -->

  <!-- Only root or user haldaemon can own the HAL service -->
  <policy user="haldaemon">
    <allow own="org.freedesktop.Hal"/>
  </policy>
  <policy user="root">
    <allow own="org.freedesktop.Hal"/>
    <allow send_destination="org.freedesktop.Hal"
        send_interface="org.freedesktop.Hal.Device"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Manager"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Leds"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Storage"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>
  </policy>

  <!-- Gentoo specific rules to allow 'plugdev' group to access Volumes and Power Management -->
  <policy group="plugdev">
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.DBus.Introspectable"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.DBus.Properties" />

    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Manager"/>

    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.DockStation"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Leds"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.LightSensor"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Storage"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
    <allow send_destination="org.freedesktop.Hal"
               send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.VideoAdapterPM"/>

  </policy>

</busconfig>

哪位大侠对照下新旧hal.conf的区别，看看能不能发现具体原因在哪里。

ps：我没有xorg.conf